Volcan V850 | V950 RS

Isodiametric tractors, reversible, with steering wheels. 79 or 91 hp

Tractors only for Countries which do not foresee engines in Phase 3B emission level.


The Volcan RS are multi-purpose specialized tractors, particularly performing in vineyards, orchards, nurseries cultivations and greens maintenance

The low centre of gravity and the rigid frame with front-wheel steering provide outstanding stability and unmatched road grip, allowing Volcan RS to work in complete safety both on flat and uneven, sloping grounds.

The reversible driving position allows to operate practically and rationally both with towed and front attachments.

Two VM engines are available for the Volcan: a 79 hp four cylinder engine (Volcan V850) and a 91 hp four cylinder engine (Volcan V950), both with EGR System inside.

The decision to use a lower number of rpms, 2300 rpm/min was conceived to reduce consumption, noise level and vibrations, with the benefit of comfort.

More Information

Engine

Model Power KW/HP Nominal speed (rpm) No. of cylinders Displacement (cm3) Aspiration Maximum torque (Nm/rpm)
Volcan V850 58 / 79 2300 4 2970 Turbo 274 / 1800
Volcan V950 67 / 91 2300 4 2970 Turbo Intercooler 420 / 1000

Transmission and gearbox

sample powersafe
The Volcan are provided with OS-Frame transmissions: a unique transmission shaft moves both the gearbox main clutch and the PTO independent clutch, while assuring the best mechanical output.

The joint in the middle of the machine lets the front axle oscillate up to 15° with respect to the rear axle, for excellent stability on slopes, as the four wheels are always stuck on the ground.

The 32-speed synchronised gearbox (16 FWD + 16 REV) with synchronized reverser always allows right gear selection for the tasks for which the tractor is intended to.

The 'Long Life' clutch is multidisc in oil bath with a proportional hydraulic control and Pro-Act System for maximum performance and comfort.

The Volcan are equipped with planetary gear axles to minimize wheelbase of the tractor and increase its manoeuvrability.

The 4-wheel drive has got an electro-hydraulically controlled disengagement of the front one.

Pto and hydraulic system

sample powersafe
The rear PTO is independent from the gearbox and synchronized with all progress speeds. PTO can be engaged by an electro-hydraulic control, it has a speed of 540/540E rpm or, as optional, 540/1000 rpm. The clutch is multidisc in oil bath.

The solid rear hydraulic lift by rams (optional with position and draft control) relies on multi-purpose practical and versatile couplings to adapt quickly and easily to all marketed equipments.

As optional, it is also available a hydraulically controlled upper link and tie rod which allows adjusting the attachments from the driver’s position, and a performing front lift which is necessary when using combined attachments.

The hydraulic system consists of a double circuit with two independent pumps and dedicated heat exchanger: the hydroguide pump has a flow rate of 28,5 l/min, like the one for the lift and distributors. As optional a 49 l/min oversize pump is available

A joy stick with electronic control (optional), is used to control both the hydraulic system and the rear lift with a single device.

Active and passive safety

sample powersafe
The braking system, with 4 multiple disc wet brakes, is assisted by an hydrostatic control acting as braking distributor which intervenes constantly and simultaneously on the 4 wheels when acting on the pedal.

Exclusive to the Volcan is the independent Brake-off parking brake that is automatically inserted when the engine is off. When the unit is operating, on the other hand, it is controlled with a practical button on the dashboard.

The electro-hydraulically controlled front and rear differential lock, simultaneously or rear only, assures the best traction on any type of grounds.

The roll-bar and the safety belts on the seat protect the operator.

Driving position

sample powersafe
The driving position with platform mounted on silent block is custom-fitted on the driver with ergonomic controls placed to be easily found and activated by the operator.

From the seat the operator enjoys a complete view both on the machine and on the attachments.

The digital display guarantees the total control of the unit.

The hydrostatic steering ensures maximum maneuverability and low turning radii.

The Volcan are equipped with standard reversible driving position: a few seconds are required to rotate by 180° the seat, the steering wheel, the console and brakes-clutch pedals so that the operator may work having the equipment in front of him and constantly be able to control the operations. This means: maximum security and comfort.

Homologated cabs

sample powersafe
Available in Lusso and Comfort versions with air conditioning, the Volcan cabs have been designed with the greatest care to even the smallest details to guarantee the inside comfort and not to damage the environment in which they operate.

The structure is mounted on silent block suspended platform completely independent from the chassis of the tractor in order to reduce noise and vibrations. 

The large glass doors improve the driver's view when operating in both traditional and reverse driving position.