Vithar L80N RS
Isodiametric tractors, monodirectional or reversible, with steering wheels. Stage 3B engine, 75 HP
The Vithar L80N RS are multi-purpose specialized tractors, particularly performing in vineyards, orchards, nurseries cultivations and greens maintenance.
The low centre of gravity, the all-wheel drive and the rigid frame with front-wheel steering provide outstanding stability and unmatched road grip, allowing Vithar L80N RS to work in complete safety both on flat and uneven, sloping grounds.
The reversible driving position (available as optional) allows to operate practically and rationally both with towed and front attachments.
Innovative technical content, elegant design and reduced overall dimensions make Vithar L80N indispensable machines for future agriculture.
||Nominal speed (rpm)
||No. of cylinders
||Maximum torque (Nm/rpm)
||Kohler KDI 2504 TCR
||55,4 / 75,3
||300 / 1,500
tractors have a 2.4 lt Kohler engine which develops 75 HP, with a powerful maximum torque of 300 Nm@1500 rpm
Turbocharged by a Turbo Intercooler, it is equipped with an EGR system alongside a DOC catalyst to reduce emissions and enhance operational efficiency. Thanks to the absence of the DPF particulate filter the regeneration is not necessary
The engine rpm electronic management
has been entirely developed by BCS Group; it is fast and precise, through the dashboard located at the right of the steering wheel and operates: speed increase and decrease, set speed setting and recalling, electronic governor switching off and shifting to idle speed.
Transmission and gearbox
The transmission of Vithar L80N is fitted with the OS-Frame chassis.
The joint in the middle of the machine lets the front axle oscillate up to 15° with respect to the rear axle, for excellent stability on slopes, as the four wheels are always stuck on the ground.
The 32-speed synchronised gearbox (16 FWD + 16 REV) with synchronized reverser always allows right gear selection for the tasks for which the tractor is intended to.
The 'Long Life' clutch is multidisc in oil bath electronically-managed and hydraulic control with Pro-Act System. The reactivity of the clutch is adjustable on 4 levels.
The Vithar L80N are equipped with planetary gear axles to minimize wheelbase of the tractor and increase its manoeuvrability.
The permanent 4-wheel drive allows exploiting the machine’s towing feature.
Pto and hydraulic system
The rear PTO is independent from the gearbox and synchronized with all progress speeds. PTO can be engaged by an electro-hydraulic control, it has a speed of 540/540E rpm.
The clutch is multidisc in oil bath.
The solid rear hydraulic lift by rams (optional with position and draft control) relies on multi-purpose practical and versatile couplings to adapt quickly and easily to all marketed equipments.
The hydraulic system consists of a double circuit with two independent pumps and dedicated heat exchanger: one of 29.5 l/min dedicated to the lift and distributors, the other of 13.5 l/min dedicated to the hydroguide and electro-hydraulic control. As optional a 51 l/min oversize pump is available.
A joystick with electronic control (available as optional on reversible versions), is used to control both the hydraulic system and the rear lift with a single device.
Active and passive safety
The use in full safety both slopes and crosswise is guaranteed by the design geometry of Vithar L80N tractors, having a low centre of gravity and a very good weight distribution on axles when the implement is coupled to the rear lift.
The braking system with multi disc wet brakes, act on the rear transmission.
Front and rear differential lock, electro-hydraulically controlled, allows the tractor to be always in traction.
Roll-bar with gas springs for an easy lowering and lifting or homologated cabins protect the operator.
Vithar L80N are characterised by a compact and comfortable driving position
, which places it in a leading position when it comes to catering to the needs of the driver:
• adoption of suspended pedals
for comfortable and stress-free operation,
• reversible model with silent-block suspended platform
• option of homologated cabs
equipped with air conditioning and heating, to guarantee comfort inside, even during long work hours.
Visibility of the road and of surroundings is optimised thanks to the new compact engine bonnet.
Vithar L80N can be equipped with reversible driving position: a few seconds are required to rotate by 180° the seat, the steering wheel, the console and brakes-clutch pedals so that the operator may work having the equipment in front of him and constantly be able to control the operations. This means: maximum security and comfort.
The multipurpose function of Vithar L80N tractors is enhanced by the reversibility of the driving seat (available as optional).
Just in 10 seconds the operator can rotate the driving platform by 180° (seat, steering wheel, dashboard, brake and clutch pedals), to work with a front-mounted implement and steadily supervising all working operations, favouring comfort and safety.
The evolution of the reversibility system has led to a remarkable lightening of the effort necessary to raise the seat. Thanks to a combination of gas springs and mechanical springs, lift the seat now requires a very low and constant effort.
The reversible versions of Vithar L80N can be equipped with approved cabins with air conditioning and heating.
Interiors are refined and the platform is hanging on silent-blocks; it’s completely independent from the tractor chassis. The cab has large windows, glass doors and sunroof giving the driver an excellent view of the equipment and road even when the driving platform is in reverse position.
Cabs create a good living environment in the compartment and were designed with a streamlined silhouette to protect the greenery rich in vegetation the tractor is working in.
The information indicated in this website is not binding. The models described may be modified, without notice, by the Manufacturer. The drawings and photos may refer to equipment that is either optional or intended for other countries.